Help you save money on rejected blister packs

Help you save money on rejected blister packs

Deblistering could help you reduce your cost. Blister packs can be rejected for several reasons including empty pockets, incorrect product, incorrect batch coding, leak test failure and inventory changes. When valuable tablets or capsules need to be recovered it is essential minimal pressure is used during deblistering to extract the product to ensure foil pieces do not detach from the blisters and product damage is prevented.

Halo has developed a comprehensive range of automatic, semi-automatic and manual deblistering machines that offer speed, efficiency and safety in the recovery of valuable product from all types of rejected blister packs including push-through, child-resistant and peelable blisters.

Find out more about our Deblister range and see what system best suit y our requirements to minimize your cost in handling rejected blister packs.

ETC-60N:

1. Semi-automatic type, blister-by-blister manual feeding, roller structure, adjustable spaces between blades, without replacement of molds, with strong versatility. Its working efficiency is about 60 boards per minute, nicely applicable to any in-line arranged blisters of capsules, soft capsule, big pills etc.
2. Inapplicable to randomly arranged blisters, or blades may damage pills. Results may be unsatisfactory with very small sized tablets; when the diameter of tablets is less than 5mm and the thickness of tablets is less than 3mm, results of deblistering are uncertain.

ETC-60A：

1. Semi-automatic type, blister-by-blister manual feeding, die orifice punching structure, four rotatable working positions, with a working efficiency of 60 boards per minute, applicable to any blisters.
2. Compared with ETC-60, ETC-60A is safer to operate because the feeding position is far away from the punching position. Therefore, it will never hurt the operator’s finger even he/she is careless. 

ETC-120A：

1. Automatic type, with an automatic feeding module based on ETC-60N, hence it has an efficiency of 120 boards per minute.
2. To ensure a high running speed, blisters are required with high standards or results will be effected just as qualities of empty capsules effecting filling rates. Therefore, blisters should be flat, neat and regularly arranged. Warped blisters will get stuck during feeding and make the machine running unsmooth.

ETC-120AL：

1. Automatic type, with a movable holder, a barrel and a lengthened feeding structure based on ETC-120A. Pills will fall into the barrel after taking out from blisters. Feeding and discharging is consecutive with a max efficiency of 120 boards per minute.
2. To ensure a high running speed, blisters are required with high standards or results will be effected just as qualities of empty capsules effecting filling rates. Therefore, blisters should be flat, neat and regularly arranged. Warped blisters will get stuck during feeding and make the machine running unsmooth.

• [cf7ic]