Capsule Polisher connect Weight Variation Monitor Machine directly

Capsule Polisher connect Weight Variation Monitor Machine directly

–Complete polishing: no heat or static produced in polishing

–Harmless: the plate rotates slowly with soft polishing cloth,which would not scratch,bump or crash capsules

–Efficiency：horizontally spiral track is superior in speed,able to match 7500-type filler

Introduction

The brushless capsule polishing & sorting machine (PCS) has an original polishing mode.with long-fiber cloth,it solves the problems of poor,low efficiency and wipe capsules softly.Slices of dustless cloth on the plate are very soft ,easy to setup,remove,and clean.They polish capsules thoroughly as polishing by towels with human hands,harmless to outside surfaced of capsule.After capsules come our from the filler and before they enter the polishing plate,the sorting unit of PCS is able to eliminate empty and half-empty capsules as an extra function of PCS.

Working Principle

The plate and the spiral track were set horizontally.After entering the center of track plate,driven by the low-speed polishing plate,capsule move along the spiral track gradually to the outer circle.In the process of movement,dust on the capsule surface will be completely wiped away by cloth.The giant collector beneath the track has the same diameter as the plate.No dust flying while the plate slowly rotates to polish the capsule.Subjected to gravity and suction,all fallen dust will be sucked into the collector,preferable to flying around or sticking with the brush with common works of polishing.

Parameter

FAQ

1. What is the use of brushless capsule polisher?

Brushless capsule polisher completely solve the problems of traditional brush polishing machine, such as unclean polishing, sticky powder polishing dirtier, and brushes are difficult to cleaning.

2. What is the efficiency of brushless capsule polisher?

The efficiency is 3800 caps/min.

3. What are the differences between brushless capsule polisher and brush capsule polisher?

The speed of the disk is about 60 revolutions per minute, it won’t warm the capsules, so that the sticky powder won’t melt and scratch the surface of the capsules. The soft cloth will clean the sticky powder on the surface of capsule softly. This is completely different from the traditional brush polishers, which use sparse and hard bristles and with high-speed revolutions per minute.